​​​​Charlie TARAC

Starting Price  $1600

Your Price        $1420

You Save          $180


Todd Hodnett Approved

Shoot with full magnification


Copyright © 2016 - 2017 TACOMHQ, Inc.

"The 2701 yard shot was doable with regular scope elevation. A 2 mile shot for me might take up to 50 mils or 60 mils [and] a ridiculous amount of cheek elevation.  This support the concept of a TARAC so that you don't need ridiculous scope cant/elevation and cheek rise." – Dan


​​​​"I called wind and videoed Mitchell Fitzpatrick (a competitive shooter for U.S. Rifle Team, regularly competing against international teams, an Expert for F-Class Long Range, and High Master for F-Class Midrange) hit at 4044 yards on a sub moa plate while he used this (the Charlie Tarac) product.  Unbelievable how close we were to the first shot on elevation.  Just 1.5 moa low and thats bc the custom curve at AB wasn't updated for the projectile we were using" – Chase Stroud


"Received my Charlie. What a marvelous beauty it is. Definite cool factor fitted on my big rifle. I have put on "static rings" and put my "adjustable base mount" on seller's FCSA forum stating I am going with ........Charlie Tarac.  Thank you, proud for association with your company" - James


"From a design standpoint not having all that cant on the scope is going to be a huge plus and will allow for a consistent and positive cheek weld.  I have been currently using an adjustable MOA mount, it works but at full tilt I loose my cheek weld and it creates a very uncomfortable shooting position.  I am pretty fortunate to be working with some of the best trainers in the world over the past 4 years and support of several different gun manufactures [and] I'm actually quite excited to try out your product.  I think you're onto something.  I have tested every adjustable mount that I could find and either they ended up with POI shift every time you adjusted them or the cant is so bad on the scope that you lose positive cheek weld and therefore lose consistency!" - Craig


"The new Charlie TARAC, maybe the best solutin for the elevation problem we have when shooting 2 Miles, and beyond.  I am a user of the adjustable bases and they work fine for me too but the non intrusive TARAC, is a cleaner solution.  If you use an adjustable base you will also get the elevation and be able to zero at any distance, but have to deal with the extra variable of managing the two elevation dials, and their own error.  With the TACOM TARAC you will only, reindex ONCE when you get close to the limit of the turret and recover a certain amount of elevation and keep using your scope's turret dial as the only elevation adjustment.  Really convenient." - Eduardo



Overview of the Charlie TARAC (Target Acquisition)

The Charlie is an optical accessory that adds up to 120+ MILs (or 400 MOA) to scopes without having to change rails, rings, cheek piece, or 100 yard zero via mirrors.  Shoot with full magnification.  MIL or MOA (true not shooter's) is built to order.


Keep Your 100 Yard Zero

The Charlie Tarac shifts an incoming target image with mirrors (like a periscope) to add a specific MIL or MOA value.  Instead of tilting the scope, requiring slanted rails, elevated scope rings, and changing your cheek position (a real pain in the neck), the Charlie shifts the target image optically (via mirrors) so you change nothing.  With the Charlie, set your rifle, rail, rings, and cheek position, to 100 yards, and add the Charlie only when you need to shoot extreme long range or for night operations.  "A 100 yard zero is a shooter's lifeline." Ken Decker, a former sniper with 3rd Ranger Battalion.


Shoot ELR with full magnification
The Charlie is a standalone device that works as an accessory to your optic to add MIL or MOA, and because the shift occurs within the unit and not the scope, you will be able to shoot ELR with full magnification.  Also, a MIL stays a MIL.  If your unit ever failed or broke, just take the Charlie off and still have the full functionality of your optic.


Built for recoil

The Charlie is used by Todd Hodentt, David Tubb, Walter Wilkinson, Eduardo De Fontcuberta, and other groups on .308, .375, .408, and 50 cals without a failure to date.  (We also provide two extension bolts with the magnetic scope mount version for added assurance.) The Charlie Tarac is extremely repeatable (once set and fastened) and you will never have to worry about misalignment.​


​​​Fully adjustable

​The Charlie is a fully adjustable unit.  Click here to learn how.


Methods of attachment

​The Charlie Tarac attachs via LaRue quick-release or directly to your scope's bell (in place of your sunshade) with magnets and two extension bolts (takes less than 40 seconds).  There are no special wrenches or tools with any of our products.  Everything is designed with the end user in mind.  Therefore, bolts are commonly found at Ace Hardware or comparable store.  Click here to learn how.


Mirrors are highly scratch resistant

The Charlie's mirrors are more scratch resistant than most high-end scopes.  They have a mil spec coating that resists scratch, salt, fog, and chemicals.  Maintain the mirrors the same as you would your scope.


No barrel mirage
The fact we shift the target image optically before your scope "sees" the image, you will not have to tilt your scope down to look over your barrel and risk of obscuring your image quality from barrel mirage (from a hot day or shooting consecutive rounds).  The front viewing port is purposely built high to mitigate this variable.


No turrets

The ultimate goal of the Charlie is to provide an incomparably fast and accurate range adjustment for scopes.  To give you the ability to shoot the reticle (if applicable) and or use your scope's turrets for final adjustment.  As nothing will be faster or more reliable.  In an example offered by Ken Decker formerly with 3rd Ranger Battalion sniper on NRA, if you have a scope with tenth MIL increments, to dial 29 MILs for a mile shot that 290 "clicks."  Either there is going to be mechanical error and you have "ghost clicks" or you will lose count.


Warranty

TACOMHQ will cover all manufacturing defects for one year.


Return Policy

Thirty day money back guarantee when returned in good-working condition.


Reviews

IMPORTANT

TACOMHQ requires identity validation by uploading one of the following:


USA

Required - Driver's License

Supplemental/Other - Military ID, DD214, or FFL (if a dealer)

NO EXCEPTIONS


International

ITAR Export License Pending

Product Intel

Detailed Intelligence

Conversion Chart

ApplicationSniper, special forces, ELR, and competition shooters
Ballistic Range100yd to +3,000yd
ShiftSee Conversion Chart
Material6061 aluminum
FinishHard anodized
ColorsMatte gray, black, or Army green
Weight12.0 oz (may vary according to add-ons)
Dimensions                        3.7" x 3.5" x 2.0" (may vary according to add-ons)
MountsLaRue QR tactical mount
AdjustableUp to +120 MILs
Tactical Case1150 Pelican Case w/ foam

  



Price

Adapters (can be purchased separately)

Scope adapter$330 + Price of Shade
Bring Your Own Shade* scope adapter                                              $330
Rail adapter$330

 




*Supplied shades for Bring Your Own Shade will be cut and permanently integrated into adapter.


Charlie Taracs

Quick release tactical mount Charlie Tarac$1420                          
Quick release tactical mount Charlie Tarac** (4 month payment plan)$375
Scope mount Charlie Tarac with adapter$1420
Scope mount Charlie Tarac with adapter** (4 month payment plan)$375






**All payments must be cleared before shipment.  Payments are non-refundable.

Specs

MIL2029303540445058607072808790100116120
MOA69100103120138150172200206241250275300309344400412

  



Bullet Points

Order and Shipping

Phone:  +1 (630) 251-8919                                          Email:  info@tacomhq.com                                       PO Box 268 Sheridan, IL 60551